D-Link DIR-X1530 User Manual page 116

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Parameter
SELECT ADDRESS
RANGE
Lease time
The default route for
LAN clients
DNS relay
When all needed settings are configured, click the APPLY button.
In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The router
assigns IPv6 addresses in accordance with the specified pairs only when the Stateful value is
selected from the Mode of IPv6 address assignment drop-down list in the Dynamic IP
Addresses section.
Figure 98. Configuring the local interface. The IPv6 tab. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the ADD button (
address field. You can choose a device connected to the router's LAN at the moment. To do this,
select the relevant MAC address from the drop-down list (the field will be filled in automatically).
Then in the IP address field, enter an IPv6 address which will be assigned to the device with the
specified MAC address. In the Hostname field, specify a network name of the device for easier
identification. To limit the time of the specified IPv6 address assignment, specify the required value
in the Lease time field. Click the SAVE button.
To edit the settings for an existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the SAVE button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
If needed, you can add your own address resource records. To do this, click the ADD button (
in the Hosts section (available if in the Dynamic IP Addresses section the Stateful value is
selected from the Mode of IPv6 address assignment drop-down list).
Use the button to set one of the available IP address ranges. In the
window displayed, select the needed range and click the SAVE
button to automatically fill in the Start IP and End IP fields.
The lifetime of IPv6 addresses provided to clients.
Move the switch to the right to let the clients, that received IPv6
addresses or configured them using the prefix, use the router as the
default IPv6 route.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
). Then click the APPLY button.
Page 116 of 254
Configuring via Web-based Interface
Description
). In the opened window, fill in the MAC
)