D-Link DIR-X1530 User Manual page 109

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Parameter
Hostname
Figure 91. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Parameter
Mode of IPv4 address
assignment
The name of the device assigned to its IPv4 address in the local
subnet.
Dynamic IP Addresses
An operating mode of the router's DHCP server.
Disable: The router's DHCP server is disabled, clients' IP
•
addresses are assigned manually.
DHCP: The router assigns IP addresses to clients
•
automatically in accordance with the specified parameters.
When this value is selected, the Start IP, End IP, Lease
time fields, the SELECT ADDRESS RANGE button, and
the DNS relay switch are displayed on the tab. Also when
this value is selected, the DHCP Options, Static IP
Addresses, and Hosts sections are displayed on the tab.
Relay: An external DHCP server is used to assign IP
•
addresses to clients. When this value is selected, the
External DHCP server IP, Option 82 Circuit ID,
Option 82 Remote ID, and Option 82 Subscriber ID
fields are displayed on the tab. Available if the Router or
WISP Repeater mode was selected in the Initial
Configuration Wizard.
Page 109 of 254
Configuring via Web-based Interface
Description
Description