Creating Ipip6 Wan Connection - D-Link DIR-X1530 User Manual

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual

Creating IPIP6 WAN Connection

On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 85. The page for creating a new IPIP6 connection. The General Settings section.
Parameter
Connection name
Enable connection
NAT
Ping
General Settings
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Page 100 of 254
Configuring via Web-based Interface
Description