D-Link DIR-X1530 User Manual page 149

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Parameter
Broadcast wireless
network
Clients isolation
Enable guest network
If the wireless network broadcasting is disabled, devices cannot
connect to the wireless network. Upon that DIR-X1530 can connect
to another access point as a wireless client.
To enable/disable broadcasting on a schedule, click the Set
schedule icon ( ). In the opened window, from the Rule drop-
down list, select the Create rule value to create a new schedule
(see the Schedule section, page 228) or select the Select an
existing one value to use the existing one. Existing schedules are
displayed in the Rule name drop-down list.
To enable broadcasting at the time specified in the schedule and
disable it at the other time, select the Enable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button. When the wireless connection is disabled, the device
will not be able to enable broadcasting of this wireless network on
schedule.
To disable broadcasting at the time specified in the schedule and
enable it at the other time, select the Disable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule,
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the icon in the
line of the network.
Move the switch to the right to forbid wireless clients of this
wireless network to communicate to each other.
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
additional network to be isolated from the devices and resources of
the router's LAN.
Page 149 of 254
Configuring via Web-based Interface
Description
click the Edit schedule icon