Creating 6In4 Wan Connection - D-Link DIR-X1530 User Manual

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual

Creating 6in4 WAN Connection

!
Before configuring the connection, please first register on a tunnel broker's web site.
On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Parameter
Connection name
Enable connection
Ping
Remote host
Client IPv6 address
Server IPv6 address
Routed IPv6 network
Figure 87. The page for creating a new 6in4 connection.
General Settings
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Enter the IPv4 address of the server provided by the tunnel broker.
Enter the IPv6 address of the router provided by the tunnel broker
(without specifying the prefix length).
Enter the IPv6 address of the server provided by the tunnel broker
(without specifying the prefix length).
Enter the address of the routed IPv6 subnet (without specifying the
prefix length) provided by the tunnel broker.
Page 103 of 254
Configuring via Web-based Interface
Description