D-Link DIR-X1530 User Manual page 170

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
After creating the rules you need to configure the filtering modes.
To open the basic or additional wireless network for the devices which MAC addresses are
specified on this page and to close the wireless network for all other devices, in the section
corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network. In the
opened window, move the Enable MAC filter switch to the right. Upon that the MAC filter
restrict mode drop-down list will be displayed. Select the Allow value from the drop-down list
and click the SAVE button.
To close the wireless network for the devices which MAC addresses are specified on this page,
select the Deny value from the MAC filter restrict mode drop-down list and click the SAVE
button.
To set a schedule for the MAC filter rule, click the Set schedule icon (
corresponding to this rule. In the opened window, from the Rule drop-down list, select the Create
rule value to create a new schedule
existing one value to use the existing one. Existing schedules are displayed in the Rule name
drop-down list.
To enable the MAC filter rule at the time specified in the schedule and disable it at the other time,
select the Enable rule value from the Action drop-down list and click the SAVE button.
To disable the MAC filter rule at the time specified in the schedule and enable it at the other time,
select the Disable rule value from the Action drop-down list and click the SAVE button.
To change or delete the schedule for a rule, click the Edit schedule icon (
corresponding to this rule. In the opened window, change the parameters and click the SAVE button
or click the DELETE FROM SCHEDULE button.
(see the Schedule section, page
Page 170 of 254
Configuring via Web-based Interface
) in the line
228) or select the Select an
) in the line