Changing A Bulb - Ford TOURNEO CONNECT 2013 Owner's Manual

Table of Contents

Advertisement

The courtesy lamp will also come on when
you switch off the ignition. It will go off
automatically after a short time or when
you start or restart the engine.
If you set the switch to position C with the
ignition switch off, the courtesy lamp will
come on. It will go off automatically after
a short time to prevent the vehicle battery
from discharging. To switch it back on,
switch on the ignition for a short time.
Reading lamps

CHANGING A BULB

WARNINGS
Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
CAUTIONS
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See Bulb
Specification Chart (page 47).
Note: When replacing a bulb, clean the
headlamp lens with a damp cloth to avoid
any electrostatic charging, which attracts
dust to the plastic lens.
TourneoConnect/TransitConnect (TC7) Vehicles Built From: 24-05-2011, Vehicles Built Up To: 31-12-2013
Lighting
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Direction indicator
1.
Turn the bulb holder anti-clockwise
and remove it.
2. Gently press the bulb into the bulb
holder, turn it anti-clockwise and
remove it.
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Transit connect 2013

Table of Contents