Using The Telephone - Vehicles Without: Navigation System - Ford TOURNEO CONNECT 2013 Owner's Manual

USING THE TELEPHONE -
VEHICLES WITHOUT:
NAVIGATION SYSTEM
This chapter describes the phone functions
of the audio unit.
Note: Refer to your audio guide for details
of the controls.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Note: You can exit the phone menu by
pressing any source button CD, AM/FM or
AUX.
Making a call
Dialling a number using voice control
Phone numbers can be dialled using voice
control. See Telephone commands
(page 159).
Dialling a number using the address
book
You can access your phone address book
via Bluetooth. The entries will appear in
the unit display.
1. Press the PHONE or the call accept
button.
2. Press the MENU button.
3. Keep pressing the MENU button until
PHONEBOOK appears.
4. Press the seek buttons to select the
desired phone number.
Note: Press and hold the seek button to
skip to the next letter in the alphabet.
5. Press the PHONE or the call accept
button to dial the selected phone
number.
TourneoConnect/TransitConnect (TC7) Vehicles Built From: 24-05-2011, Vehicles Built Up To: 31-12-2013
Telephone
Ending a call
Calls can be ended by pressing the call
reject button.
Audio units without a telephone keypad
can also end a call by pressing either
PHONE, CD, AM/FM or ON/OFF, or by
pressing the MODE button on the remote
control
Redialling a number
1. Press the PHONE or the call accept
button.
2. Press the MENU button.
3. Select the CALL OUT list or the CALL
IN list. On some audio units, select the
MISSED, INCOMING or OUTGOING
calls list.
Note: If the active phone does not provide
a call out list, the last outgoing call
number/entry can be redialled.
4. Press the seek button on the audio unit.
5. Press the PHONE or the call accept
button to dial the desired phone
number.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by pressing
either the call accept button, the PHONE
button or the MODE button on the remote
control.
Rejecting an incoming call
Incoming calls can be rejected by pressing
the call reject button.
Audio units without a telephone keypad
can also reject a call by pressing either
PHONE, CD, AM/FM or ON/OFF.
Receiving a second incoming call
Note: The second incoming call function
must be activated in your phone.
148