Regional Mode (Reg); News Broadcasts - Ford TOURNEO CONNECT 2013 Owner's Manual

REGIONAL MODE (REG)

The function REG (regional mode) controls
the behaviour of AF switching between
regionally related networks of a parent
broadcaster. A broadcaster may run a fairly
large network across a large part of the
country. At various times of the day this
large network may be broken down into a
number of smaller regional networks,
typically centred on major towns or cities.
When the network is not split into regional
variants, the whole network caries the
same programming.
Regional mode ON: This prevents random
AF switches when neighbouring regional
networks are not carrying the same
programming.
Regional mode OFF: This allows a larger
coverage area if neighbouring regional
networks are carrying the same
programming, but can cause random AF
switches if they are not.
1. Press and hold the MENU button until
the display changes.
2. Press the MENU button repeatedly
until REG is shown in the display.
3. Using the seek up or seek down button
turn the function on or off.
4. Press the MENU button or allow the
system to time out to confirm your
selection.

NEWS BROADCASTS

Some audio units interrupt normal
reception to broadcast news bulletins from
stations on the FM waveband linked
stations, in the same way as traffic
information is provided.
TourneoConnect/TransitConnect (TC7) Vehicles Built From: 24-05-2011, Vehicles Built Up To: 31-12-2013
Audio unit menus
During news broadcasts, the display
alternates between the station name and
NEWS. News interrupts are broadcast at
the same preset volume level as traffic
announcements.
1.
2. Using the seek up or seek down button
3. Press the MENU button to confirm
141
Press and hold the MENU button until
NEWS is shown in the display.
turn the function on or off.
your selection.