Table of Contents
Advertisement
The measured value cannot be calculated.
Please check sample preparation and measurement procedure.
Stored results of the CAL Check measurements have been lost.
Please redo the CAL Check measurements to ensure accurate results.
User settings have been lost.
Please reset the values. If the issue persists, please contact Hanna
Instruments technical support.
Flash drive is not recognized or it might be damaged.
Please insert a new USB flash drive.
Data log is full.
Please review logged data and delete unnecessary logs.
Date and time settings have been lost.
Please reset the values. If the issue persists, please contact Hanna
Instruments technical support.
Battery level is too low to ensure normal functioning and the meter
will turn off.
Connect the USB adapter to charge the battery.
English is the only available language. Some features are no longer
available.
Restart the meter. If the issue persists, please contact Hanna
Instruments technical support.
69
Advertisement
Table of Contents
