Hanna Instruments HI83325 Instruction Manual page 29

Multiparameter photometer

Hide thumbs Also See for HI83325:

Table of Contents

(b) Shaking the cuvette, moving the cuvette up and down. The movement may be gentle or vigorous.

This mixing technique is indicated with "shake gently" or "shake vigorously", and one of the

following icons:

In order to avoid reagent leaking and to obtain more accurate measurements,

close the cuvette first with the supplied High-Density Polyethylene (HDPE)

plastic stopper

and then the black cap.

Whenever the cuvette is placed into the measurement holder, it must be

dry outside and free of fingerprints, oil and dirt. Wipe it thoroughly with

HI731318

microfiber cleaning cloth or a lint-free wipe prior to insertion.

Shaking the cuvette can generate bubbles in the sample, causing higher

readings. To obtain accurate measurements, remove such bubbles by

swirling or by gently tapping the cuvette.

Do not let the reacted sample stand too long after reagent is added. For best accuracy, respect the

timings described in each specific method.

It is possible to take multiple readings in a row, but it is recommended to take a new zero reading for

each sample and to use the same cuvette for zeroing and measurement when possible.

shake gently

shake vigorously

Table of Contents