For details on configuring management IP addresses, see Configure IP Addresses from the CLI. The X0 and
X1 ports can be configured through SonicOS/X GUI at NETWORK | System > Interface > Interface
Settings.
NOTE:
SafeMode access is through the top AUX MGMT port to the Management (Blade 1) port. Refer
to the illustration in
Registration and Licensing
To register SonicOS/X, you can click Register in the SonicOS/X web management interface, then enter your
MySonicWall credentials. Or you can log in to MySonicWall at
and register SonicOS/X there, then synchronize from within SonicOS/X.
Registration in MySonicWall requires your SonicOS/X serial number and authentication code, which you can
find on the appliance label or on the DEVICE | Settings > Status page of the SonicOS/X web interface.
You can purchase additional Security Service licenses by clicking Licenses in the row for your SonicOS/X on
the My Products page in MySonicWall.
Instance Licenses
When you register the SonicOS/X and license security services on it, additional license keys are
automatically created for a Multi-Instance deployment. These Instance licenses have unique serial numbers
and authentication codes. All security services licensed on the SonicOS/X are inherited by each Instance.
Each Instance license is separate and independent, allowing each Instance to have a unique configuration.
Latest Firmware
After product registration, be sure to download the latest firmware and upgrade your SonicOS/X. You can
run different SonicOS/X firmware versions on each Instance, if desired. The Instance firmware images are
available for download along with the main firmware in MySonicWall.
NOTE:
Enabling Multi-Instance requires a chassis reboot, which can take up to 15 minutes.
Rear
Panel.
https://www.mysonicwall.com
SonicOSX 7 Getting Started Guide for the NSsp Series
from a browser
15
System Setup