Table of Contents
Advertisement
Port
IP Address / Login / Password
MySonicWall.com
register on MySonicWall.com to establish login and password
1 SafeMode is accessed through the Management (Blade 1) port which is by default 192.168.168.168.
This value may be changed in ChassisOS. For details, see Access the Console Port and Configure
IP Addresses from the CLI
NOTE:
The login credentials are admin/password if SonicOS/X is unavailable; otherwise the
administrator's SonicOS/X credentials work. See Using the SafeMode GUI.
System Startup
SonicOS/X comes up a few minutes after connecting the SonicOS/X to a power source. You can configure
your SonicOS/X from either the X0 or MGMT interface:
HTTPS Management via X0
l
HTTPS Management via MGMT Port
l
HTTPS Management via X0
The X0 interface can be configured as a static, transparent, or Layer 2 Bridged Mode interface.
1. Connect your management computer to the SonicOS/X X0 interface and configure your computer
with a static IP address on the LAN subnet (default subnet:
2. In your browser, enter the default IP address
credentials:
3. Username: admin
Password:
password
4. Continue with
SonicOS/X Basic
HTTPS Management via MGMT Port
The MGMT port is a dedicated 1 Gigabit Ethernet interface for appliance management and SafeMode
access.
1. Connect your management computer to the SonicOS/X MGMT interface and configure your
computer with a static IP address on the MGMT subnet (default subnet:
2. In your browser, enter the default IP address
default credentials:
3. Username: admin
password
Password:
4. Continue with
SonicOS/X Basic Configuration.
If the services are enabled, you can access SafeMode, SSH, or ping via the MGMT port. From SafeMode,
you can upgrade firmware, boot backup images and more.
https://10.10.10.10
Configuration.
https://192.168.168.166
SonicOSX 7 Getting Started Guide for the NSsp Series
)
10.10.10.0/24
and log in using the default
192.168.168.0/24
and log in using the
).
12
System Setup
Advertisement
Table of Contents
