Configure Ip Addresses From The Cli; Restart Sonicosx From The Cli; To Access Sonicosx Console - SonicWALL SonicOSX 7 Getting Started Manual

Configure IP Addresses from the CLI

Move back and forth to Configure Mode using
CONFIGURE IP ADDRESSES
For a list of Configuration Mode commands, enter
Of these, the most useful is
management and gateway IP addresses to conform to your network. Example syntax:
network mgmt IPv4 sonicos-IP 192.168.169.33 netmask 255.255.255.0 chassis-IP
192.168.169.3.
In the previous line, the TAB key can be used to generate the works identifying the IP addresses, while the
addresses must be provided. All of the address are changed at once in this manner.
Immediately after reconfiguring management IP addresses, the
up safemode, ping, or ssh services, or all three.

Restart SonicOSX from the CLI

SonicOSX can be rebooted from current settings:
restart-sonicos
Or from factory defaults:
restart-sonicos factory-settings true
CAUTION: Returning to factory defaults could disrupt your testing efforts as current settings
are lost.

To Access SonicOSX Console

Entering
smconsole 1
To gain access to the console use admin and password. Enter
configure
. This allows changing the SonicOSX management, blade
network-mgmt
allows access to the SonicOSX Console CLI on the Root Instance.
and .
exit
.
?
services-mgmt
for help.
?
SonicOSX 7 Getting Started Guide for the NSsp Series
command allows setting
CLI Bring-up
44