Show Commands At Chassisos Prompt - SonicWALL SonicOSX 7 Getting Started Manual

The commands include:
allows pinging of addresses in the Management network
ping
l
initiates the system shell
shell
l
install-failsafe
l
between two remote hosts.
turns power to the physical blades on and off and effects a reset of SonicOSX and all
power-cycle
l
instances
reboot-system
l
restart sonicOS
l
scp-core-dump
l
Management network address
Show Commands at ChassisOS Prompt
Enter show to get a list:
?
SHOW OS COMMANDS
show console-logs
l
logical blades. These are SonicOSX console logs.
show core-dump-files
l
show env-sensors
l
show mt-status
l
Blades. This command only works on the master blade (Physical Blade 1).
show system-status
l
two Physical Blades:
securely installs a failsafe image between a local host and a remote host or
restarts all software (relatively graceful)
restarts only SonicOSX instances
in the event of a system crash, this allows a secure copy of a core dump to a
: Shows logs of individual logical blades, allows stepping through logs of all four
: Show all of the core dump files that have been generated so far.
: Lists BMC parameters tracking temperature, fan speed, and so on.
: Shows allocation of CPU cores on specified CPU (1 to 4) among the two Logical
: This command is particularly useful in showing processes in progress on the
SonicOSX 7 Getting Started Guide for the NSsp Series 41
CLI Bring-up