Creating Initial Flash Image Containing Bitstreams For Factory Image And One Application Image - Intel Agilex Series Configuration User Manual

•
The
ninit_done
pin.
in_reset
•
The
reset_in
to application logic.
Figure 76. Required Communication and Host Components for the Remote System Update Design Example •
User Mode
Reset
Power On
Reset
5.6.2. Creating Initial Flash Image Containing Bitstreams for Factory Image and One Application
Image
1. On the File menu, click Programming File Generator.
2. Select Intel Agilex from the Device family drop-down list.
3. Select the configuration mode from the Configuration mode drop-down list. The current Intel Quartus Prime Software
only supports remote system update feature in Active Serial x4.
Intel ® Agilex ™ Configuration User Guide
196
output signal from Reset Release IP gates this reset by connecting to the
Reset Bridge Intel FPGA IP provides a user mode reset. In this design, the exported
5. Remote System Update (RSU)
683673 | 2021.10.29
ninit_done_reset
connects
resetpin
User Mode
Connection
Send Feedback
Reset
PCB