Page 2
Intel product could create a situation where personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time, without notice.
010770.htm. Instrucciones de seguridad importantes Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en http://support.intel.com/support/motherboards/server/sb/cs-010770.htm. WARNINGS Server power on/off: The push-button on/off power switch on the front panel of the server does not turn off the AC power.
This manual is for system technicians who are responsible this RAID Activation Key. It provides a brief overview of the features of the AXXRAKSAS2, and instructions on how to install the component. For the latest version of this manual, see http://support.intel.com/support/motherboards/server/.
This guide is specific to the Intel RAID Activation Key with the order code, AXXRAKSAS2. ® This key enables hardware RAID across all modes (0, 1, 5, 6, 10, 50, and 60) on these Intel server ® boards and systems that include an Intel...
DIMM, and the SR1550ALSAS and SR2500LX provide a mini-DIMM socket. Only use memory DIMMs listed under the RAID module section of the Tested Memory List, available under the listing for your system at http://support.intel.com/support/motherboards/server. ® A backup battery, the Intel RAID Smart Battery Backup Unit (AXXRSBBU4), is available to prevent data loss in the RAM cache if AC power is lost.
It may be on a midplane board or on the SAS riser board in a specially keyed PCI Express* slot. 3. With the Intel name on the RAID Activation Key facing up, insert the RAID Activation Key into the socket.
3. Align the notch on the DIMM with the key in the DIMM socket. 4. Push the DIMM firmly into the socket. The clips will latch. Make sure the clips are firmly latched. ® Figure 3. Installing DIMM on Intel Server System S7000FC4UR SAS Riser AF000481 Figure 4. Installing Mini-DIMM on Midplane Board...
Finish the Installation 1. (Optional) Follow the instructions included with the Intel RAID Smart Battery (AXXRSBBU4) to install this accessory. 2. Reinstall any components inside of the server chassis that you needed to remove. See your server board or chassis documentation for instructions.