Intel Agilex Series Configuration User Manual page 73

3. Intel Agilex Configuration Schemes
683673 | 2021.10.29
–
0x0C 0x0F
For Page 0 if you append the start address bits[31:11] with
32'b00000000000000010000000000000000 = 0x10000
If you append the end address
For Page 1 if you append the start address with 13'b0000000000000, the result is
32'b0000000000011100000000000000000000 = 0x700000
If you append end address
.
0xD4B8C3
The start and end address must be correlated with the start and end address for each page printed in the
3.1.7.1.5. Implementing Page Mode and Option Bits in the CFI Flash Memory Device
The following figure shows a sample layout of a
memory device. For different density devices refer to the Byte Address Range for CFI Flash Memory Devices with Different
Densities table below. The option bits follow the configuration data in memory.
Send Feedback
Sector Offset
with , the result is
0x00196E0 2'b11
with , the result is
0x00352E30 2'b11
with three pages. The end addresses depend on the density of the flash
.pof
0x00352E30
, the result is
13'b0000000000000
.
26'b00011001011011100011000011 = 0x65B8C3
.
32'b00000000110101001011100011000011 =
Value
file.
.map
Intel ® Agilex ™ Configuration User Guide
.
73