Table 3-2. Diagnostic Test Groups - Motorola AltiVec MVME5100 Series Installation & Use Manual

Test Group Description
EPIC EPIC Timers Test
PHB PCI Bridge Revision Test
RAM RAM Tests (various)
HOSTDMA DMA Transfer Test
RTC MK48Txx Real Time Clock Tests
UART Serial Input/Output Tests (Register, IRQ, Baud, & Loopback)
Z8536 Z8536 Counter/Timer Tests*
SCC Serial Communications Controller (Z85C230) Tests*
PAR8730x Parallel Interface (PC8730x) Test*
KBD8730x PC8730x Keyboard/Mouse Tests*
ISABRDGE PCI/ISA Bridge Tests (Register Access & IRQ)
VME3 VME3 Tests (Register Read & Register Walking Bit)
DEC DEC21x43 Ethernet Controller Tests
CL1283 Parallel Interface (CL1283) Tests*
Notes 1. You may enter command names in either uppercase or
http://www.motorola.com/computer/literature

Table 3-2. Diagnostic Test Groups

lowercase.
2. Some diagnostics depend on restart defaults that are set up only
in a particular restart mode. Refer to the documentation on a
particular diagnostic for the correct mode.
3. Test Sets marked with an asterisk (*) are not available on the
MVME5100.
Standard Commands
3-27
3