Default Settings; Cnfg - Configure Board Information Block - Motorola AltiVec MVME5100 Series Installation & Use Manual

Default Settings

The following sections provide information pertaining to the firmware
settings of the MVME5100. Default (factory set) Environment (ENV)
commands are provided to inform you on how the MVME5100 was
configured at the time it left the factory.

CNFG - Configure Board Information Block

Use this command to display and configure the Board Information Block,
which is resident within the NVRAM. This data block contains various
elements detailing specific operational parameters of the MVME5100.
The structure for the board is shown in the following example:
The Board Information Block parameters shown above are left-justified
character (ASCII) strings padded with space characters.
The Board Information Block is factory-configured before shipment.
There is no need to modify block parameters unless the NVRAM is
corrupted.
Refer to the PPCBug Firmware Package User's Manual listed in
Appendix C, Related Documentation
examples.
http://www.motorola.com/computer/literature
Board (PWA) Serial Number
Board Identifier
Artwork (PWA) Identifier
MPU Clock Speed
Bus Clock Speed
Ethernet Address
Primary SCSI Identifier
System Serial Number
System Identifier
License Identifier
Default Settings
= MOT00xxxxxxx
= MVME5100
= 01-W3403FxxC
= 450
= 100
= 0800AF2A0A57
= 07
= nnnnnnn
= Motorola MVME5100
= nnnnnnnn
for a description of CNFG and
3
3-7