MVME5100 and
PMCspan-002
Assembly
Figure 1-5. PMCspan-010 Installation on a PMCspan-002/MVME5100
6. Place the PMCspan-010 on top of the PMCspan-002. Align the
7. Gently press the two PMCspan modules together and verify that P3
8. Insert the four screws (Phillips type) through the holes at the corners
Note
http://www.motorola.com/computer/literature
mounting holes in each corner to the standoffs and align
PMCspan-010 connector P3 with PMCspan-002 connector J3.
is fully seated in J3.
of PMCspan-010 and into the standoffs on the primary
PMCspan-002. Tighten screws securely.
The screws have two different head diameters. Use the screws
with the smaller heads on the standoffs next to VMEbus
connectors P1 and P2.
Installation
PMCspan-010
P3
J3
1
1-11