36
en | (Optional) Installing a Sunshield
10
(Optional) Installing a Sunshield
Quantity
2
2
4
4
1
Additional Tools Required
1
1
1. Mount the camera. Apply power (24 VAC or 95W High PoE). Connect using a web browser
or VMS.
2. Operate the tilt to near the upper limit.
3. Remove and discard 4 screws.
2022-09 | 1.6 | F.01U.334.820
Component
Sunshield shells
Spike strips
Screws
Flat washers
Quick Installation Guide
Phillips-head screwdriver, #2, to remove factory-installed plastic screws from
the camera head
Torx driver, T20, for M4 Torx head screws
Installation Manual
MIC IP fusion 9000i
Bosch Security Systems