Bosch MIC IP fusion 9000i Installation Manual page 24

24 en | Mounting
2.
3.
4.
5.
6.
Note the position of the visor when the camera is installed in inverted orientation. The visor
will now be near the body of the camera.
Figure 5.4: MIC camera with camera head inverted
Note: It is not necessary to remove the section for the illuminator on the sunshield because
the illuminator is attached to the opposite side of the camera visor.
Seal the mount so that moisture or water cannot collect and stay in the bottom of the MIC
camera.
The figure that follows shows the camera installed in inverted orientation on a pole.
2022-09 | 1.6 | F.01U.334.820
Apply power to the camera.
Access the web browser of the camera.
Access the page Configuration.
Navigate to Camera > Installer Menu > Orientation.
Select "Inverted."
The camera head will rotate automatically into inverted position (180°).
Installation Manual
MIC IP fusion 9000i
Bosch Security Systems