Bosch MIC IP fusion 9000i Installation Manual page 35

MIC IP fusion 9000i
9. Carefully tilt the camera to the side with the pin under the hook.
Notice!
i
Risk of damage to the camera!
Ease the camera into position; do not allow it to fall unassisted into rotated position or allow
head to slam into any surface or object!
10. Make the appropriate electrical connections. Refer to the chapter Connections for more
information.
11. Screw the green GND wire from the camera base to the ground hole on the inside wall of
the DCA. If the DCA is not mounted to earth grounded surface, attach user-supplied grounded
wire (item 4 in step 1) to the same connection point.
12. Carefully tip the camera to its final position. Avoid pinching wires between the camera
base and the DCA! Insert four washers and hex bolts (supplied).
Bosch Security Systems
Installing a MIC Camera on a Hinged DCA | en
Installation Manual
2022-09 | 1.6 | F.01U.334.820
35