AUTODOME IP starlight 5000i
6
Installing a microSD card (optional)
1.
2.
3.
Note: The next two steps are for pendant models only.
1.
2.
Bosch Security Systems
Push the camera block until you see the card slot (item 1 in the following figure).
Insert the card into the slot (item 2 in the following figure).
Push the camera block into its original position (item 3 in the following figure).
1.
3.
Replace the trim ring / bubble enclosure.
Tighten the screws with the T15 Torx screwdriver.
2.
Installation Manual
Installing a microSD card (optional) | en
13
2020-04 | 2.0 |