Adjusting The Maximum Embroidering Speed; Setting The Embroidery Motif Position When Opening - Bernina 540 User Manual

Setup Program
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Change upper thread tension».
> To increase the upper thread tension, slide the slider upwards or touch the icon «+».
> To decrease the upper thread tension, slide the slider downwards or touch the icon «-».

Adjusting the maximum embroidering speed

You can use this function to reduce the maximum speed.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Change maximum speed».
RPM
> To decrease the embroidery speed, slide the slider to the left or touch the icon «-».
> To increase the maximum embroidery speed, slide the slider to the right or touch the icon «+».

Setting the embroidery motif position when opening

As the default setting, opened embroidery motifs are always displayed in the center of the hoop. You can
use the switch «Restore saved embroidery motif position» to set that embroidery motifs are opened at the
position in the hoop at which they had been saved in the BERNINA stitch software.
> Tap «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Center the embroidery motif».
> To open the embroidery motif at the saved position, set the switch «Restore saved embroidery motif
> To open the embroidery motif in the center of the hoop, set the switch «Restore saved embroidery motif
50
position» to «I».
position» to «0I».