Kyocera FS-9120DN Operating Manual page 51

Chapter 3 Using the Operator Panel
Linefeed (LF) Action
This procedure instructs the printer what to do when it re-
ceives a linefeed code (character code 0AH).
1 Press the MENU key.
2 Press the or
appears.
Page Set
3 Press the key.
4 Press the or
appears.
>LF Action
LF only
5 Press the ENTER key. A blinking question mark (?)
appears.
>LF Action
? LF only
6 Press the or
feed action appears.
A linefeed is performed. (default)
LF only
A linefeed and carriage return are
CR and LF
performed.
The linefeed is ignored.
Ignore LF
7 When the desired action is displayed, press the
ENTER key.
8 Press the MENU key. The message display returns to
Ready.
Carriage-Return (CR) Action
This procedure instructs the printer what to do when it re-
ceives a carriage-return code (character code 0DH).
1 Press the MENU key.
2 Press the or
appears.
Page Set
3 Press the key.
3-30
key repeatedly until Page Set >
>
key repeatedly until >LF Action
key repeatedly until desired line-
key repeatedly until Page Set >
>
4 Press the or
appears.
>CR Action
CR only
5 Press the ENTER key. A blinking question mark (?)
appears.
>CR Action
? CR only
6 Press the or
riage-return action appears.
A carriage-return is performed. (Default)
CR only
A carriage-return and linefeed are
CR and LF
performed.
The carriage-return code is ignored.
Ignore CR
7 When the desired action is displayed, press the
ENTER key.
8 Press the MENU key. The message display returns to
Ready.
Wide A4
Turn this On to increase the maximum number of characters
that can be printed in a line for A4 page (78 characters at 10
pitch) and Letter size page (80 characters at 10 pitch). This
setting is effective only in PCL 6 emulation.
1 Press the MENU key.
2 Press the or
appears.
Page Set
3 Press the key.
4 Press the or
pears.
>Wide A4
Off
5 Press the ENTER key. A blinking question mark (?)
appears.
>Wide A4
? Off
key repeatedly until >CR Action
key repeatedly until desired car-
key repeatedly until Page Set >
>
key repeatedly until >Wide A4 ap-