Installing & Printing On An Dec Ultrix 4.3 System - Kyocera FS-600 User Manual

6. The script creates a printcap entry for the printer just configured. The screen dis-
plays the entry and asks if you want the script to append it to your /etc/printcap
file. See below for a sample printcap file. Type yes or no and press ENTER. If
you type no, you may perform manual edits.
In your /etc/printcap file, be sure not to change the name of the device given
EcoLAN 2000E in Step 2. You must reference the same lp: entry you wrote on the
lp command line of the printcap file. For example:
<printer_name> | EcoLAN 2000E printer:\
:lp=/dev/<printer_name>:\
:if=/usr/nic/infilter:\
:sd=/usr/spool/<printer_name>:
All printcap entries must be prefaced with a tab except for the entry on the first
line.
7. The script creates a spool directory in /usr/spool and starts the daemon for the
newly configured printer. It also displays the path used if you ever need to restart
the daemon. For example:
/usr/nic/lpr_print /dev/nic/<printer_name> printfast 10001 &
8. Run the ps command so that you can view all your lpd processes.
Type: ps -ax | grep lpd
9. Kill all of your lpd processes. Type: kill -9 <Process ID> (this will stop ALL
printing).
10. Restart the daemon.
Type: /usr/lib/lpd
11. Installation for the system is done. You are prompted to configure any more print-
ers.
Type yes or no and press ENTER. We also suggest you ping the EcoLAN 2000E
to test communications.
7.4.5 Installing & Printing on an DEC ULTRIX 4.3 System
1. Run the Installation script by typing: nicinst.
The script automatically downloads the correct EcoLAN 2000E utilities for your
particular system and prompts you for information as needed.
2. What is the node name of the Print Server unit?
Type the node name entered in /etc/hosts. For example, printfast and press
ENTER.
UNIX Configuration 7-16