Kyocera FS-600 User Manual page 31

4. From the Available Options screen, select Quick Setup and press ENTER.
Use Quick Setup to connect your EcoLAN 2000E, print queue and printer
correctly. You can modify these later if you need to.
5. Select Print server and press the F3 key to modify the entry.
6. Enter the name of the print server in the Print server field and press ENTER.
Note: The print server name is printed under the Novell Network Information on the
Status and Configuration report. The factory default name consists of three letter
identifier, an underscore, and the serial number of the unit.
7. Press the ESC key to move to the New printer field. Enter a name and press
ENTER.
8. Press the ESC key to move to the New print queue field. Enter a name and press
ENTER.
9. Press the ESC key to move to the Printer type field and press ENTER. From the
list of printer types, select Other/Unknown and press ENTER.
10. When you are finished, press the F10 key to save the configuration.
Repeat steps 5 through 10 for each file server that the printer server services.
11. To view, add, delete, or modify print servers or queues after the initial setup, select
either the Print Queues or Print Servers option on the Available Options screen.
NetWare Configuration 4-11