Data Monitor Window; Status Byte Error Pop-Up - Texas Instruments ADS126 EVM-PDK Series User Manual

ADS126xEVM Software
• View Data reveals a data monitor that shows the raw ADC codes along with the STATUS and
CHECKSUM/CRC bytes, as shown in
• View Errors reveals a STATUS byte error indicator that ORs all of the STATUS byte error flags to
check if any errors occurred in the previous acquisition, as shown in
automatically appears when an error flag is found in the acquired data set. Switching to the View Data
window is useful to see when this error first appeared in the collected data.
30
ADS126xEVM-PDK
Figure 27.
Figure 27. Data Monitor Window
Figure 28. Status Byte Error Pop-up
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
Figure 28. This window
SBAU206 – April 2015
Submit Documentation Feedback