Installing Printer Driver In Macintosh; Custom Mode - Kyocera Mita FS-1128MFP Setup Manual

Installing Printer Driver in Macintosh

SETUP GUIDE
NOTE:
If the Windows security window appears, click Install this driver software
anyway.
5
A message appears saying that the printer has been installed successfully. Click
Finish to exit the printer installation wizard and return the CD-ROM main menu.
If the device setup dialog box appears after you click Finish, you can specify the
settings for items such as optional features installed in the print system. You can also
specify the device settings after you exit the installation. For details, refer to Device
Settings in the printer driver operation manual on the CD-ROM.
This completes the printer driver installation procedure. Follow the on-screen
instructions to restart the system, if required.

Custom Mode

Use Custom Mode if you want to specify the printer port and select the software to
be installed. For example, if you do not want fonts installed on your computer to be
replaced, select Custom Mode and deselect the Fonts checkbox in the utility tab.
NOTE:
Install TWAIN driver or WIA driver on your computer in this mode.
1
Select Custom Mode.
2
Following the instructions in the install wizard window, select the software packages
to be installed and the specify the port, etc. For details, refer to Custom Installation
in the printer driver operation manual on the CD-ROM.
1
Turn on the machne and the Macintosh.
2
Insert the included CD-ROM (Product Library) into the CD-ROM drive.
3
Double-click the CD-ROM icon.
4
Double-click either OS X 10.2 and 10.3
Only or OS X 10.4 or higher depending
on your Mac OS version.
Installing Printer Driver
29