Kyocera Mita FS-1128MFP Setup Manual page 8

Preparations
2
3
4
8
Connect the machine to the PC or your network device. When using the network
interface, remove the cap. These cables are sold separately.
Available Standard Interfaces:
Interface Function
Network Printer/Scanner/
Interface Network FAX
USB Interface Printer/TWAIN/
WIA
Connect the power cord to the machine and
the other end into a power outlet.
Turn the power switch on (|). The machine
begins to warm up. The machine will begin
replenishing the toner; this will take
approximately 15 minutes.
Once the toner has been replenished,
Ready to copy will appear on the
message display.
Necessary Cable
LAN (10Base-T or 100Base-TX, Shielded)
USB2.0 compatible cable (Hi-Speed USB
compliant, Max. 5.0 m, Shielded)
SETUP GUIDE