Kyocera Mita FS-1128MFP Setup Manual page 4

Preparations
Installing Toner Container
4
3
Slide the Shipping Lock to the unlock
position.
IMPORTANT: When installing the Document Processor, refer to Installation Guide
attached to the Document Processor.
4
Attach the Guide Case to the machine right
as required.
1
Open the front cover.
2
Remove the process unit from the machine.
IMPORTANT: Place the process unit on a
clean, level surface where it will not be
exposed to any sort of impact or shock. The
drum in the process unit is sensitive to light
and should not be exposed to normal office
lighting for more than five minutes.
3
Check the lock lever to the UNLOCK
position.
Shipping Lock
Guide Case
SETUP GUIDE