Kyocera Mita FS-1128MFP Setup Manual page 3

1 Preparations
Clearance
Environment
Unpacking
SETUP GUIDE
300 mm
(11-13/16")
• Temperature: 10 to 32.5 °C (50 to 90.5 °F)
• Humidity: 15 to 80 %RH
• Power Supply: 120 V AC, 60 Hz, 7.4 A / 220 to 240 V AC, 50/60 Hz, 3.8 A
CAUTION:
Be sure to provide enough space around machine. Prolonged use
without sufficient clearance may cause overheating.
1
Unpack the machine and all its included
components.
If the machine is FS-1128MFP, the modular
cord with the attached ferrite core is
enclosed.
IMPORTANT: Place the machine in a
stable position. When carrying the printer,
always hold the right and left sides as
shown.
2
Remove the packing tape and the protective sheet.
300 mm 300 mm
(11-13/16") (11-13/16")
500 mm
(19-11/16")
1000 mm
(39-3/8")
3