Kyocera Mita FS-1128MFP Setup Manual page 19

Accessing COMMAND CENTER
1
2
Item
SMTP Protocol
SMTP Port Number
SMTP Server Name
SMTP Server
Timeout
Authentication
Protocol
Authenticate as
Login User Name
Login Password
POP before SMTP
Timeout
Test
E-mail Size Limit
18
Click Advanced -> SMTP -> General.
Enter the correct settings in each field. The table below provides a summary of the
items displayed on the SMTP Protocol Settings page.
Description
Enables or disables SMTP protocol. To use e-mail, this protocol must be enabled.
Set the SMTP Port Number or use the SMTP default port 25.
Enter the SMTP server name or its IP address. If entering the name, rather than the
IP address, a DNS server address must also be configured. The DNS server
address may be entered on the TCP/IP General tab.
Sets the timeout in seconds during which this machine tries to connect to the SMTP
server.
Enables or disables the SMTP authentication protocol or sets POP before SMTP
as the protocol. The SMTP authentication supports Microsoft Exchange 2000.
Specifies the user to be authenticated in SMTP authentication. When POP3 User 1
to 3 and iFAX User are set, you can select one of them. If you want to select a
different user, select Other and enter the login account name and login
password for authentication.
When Other is selected for Authenticate as, the account name set here will be
used for SMTP authentication.
When Other is selected for Authenticate as, the password set here will be used for
authentication.
Enter the timeout in seconds during which this machine tries to connect to the
SMTP server when set POP before SMTP as the Authentication Protocol.
Tests to confirm that the settings on this page are correct. When the Test button is
pressed, this machine tries to connect to the POP3 server.
Enter the maximum size of e-mail that can be sent in Kilobytes. When the value is 0,
the limitation for E-mail size is disabled.
SETUP GUIDE