Numerical Value Information Type - Kyocera KM-C2520 Set Up And Operation Manual

iTag

Numerical Value Information Type

Use this type for data that is mostly numerical, such as invoice numbers. This field type restricts inputs that
are non-numeric, such as letters and symbols.
The following settings should be set in the wizard when selecting the numerical value index field type.
•
Default Value. The default data that appears for this field. When this optional setting is provided, the
data appears on the field's input box instead of blank. This allows for faster input since the operator
can simply press enter or do some editing to enter the desired data for this field.
•
Number of decimal places. This setting controls the number of decimal places that are allowed for
this field. Choices are Automatic, None (whole numbers), 1, 2, 3, 4, and 5.
•
Show value as percentage. This setting applies only when this field is input or edited in SharePoint
Services. When checked, the number is stored and displayed as a percentage. An input of 25 in the
MFP will be stored in SharePoint Services as 25%.
•
Minimum value. The minimum value for this field. Setting this field restricts the input at the MFP to
not be less than this value.
•
Maximum value. The maximum value for this field. Setting this field restricts the input at the MFP
to be not greater than this value.
Copyright © 2005~2007 Kyocera Mita America, Inc
All Rights Reserved
.
Specification/Setup/Operation
Version 8.0
Page 18