Recipient Selection From One-Touch Keys; Scan With Twain Driver; Selecting Color Scan Mode - Kyocera FS-1118 Operation Manual

Selecting Color Scan Mode

OPERATION GUIDE
9 Place the original on the platen and press Start.
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.

Recipient Selection from One-Touch Keys

Frequently used recipients can be registered into the one-touch keys. If two or more
one-touch keys are chosen a simultaneous transmission can take place. Refer to the
Advanced Operation Guide for the registration procedure for the one-touch keys.
1
Press Send.
2 Press the one-touch key on which the destination is registered.
3 Place the original on the platen and press Start.
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.

Scan with TWAIN Driver

Be sure that you connect your PC with the machine using the USB cable and install
the Kyocera TWAIN Driver. The scan can be carried out from any TWAIN compatible
application program. Refer to Advanced Operation Guide for the installation
procedure and the usage of Kyocera TWAIN Driver.
The following color modes are available for scanning:
Mode
Full Color
Grayscale
Monochrome
Refer to the Advanced Operation Guide.
Description
The original will be scanned in full color. The scanning
exposure will be set to Manual.
The shading of the original will be reproduced. The scanning
exposure will be set to Manual.
The original will be scanned in monochrome. The resulting file
size for the scan data will be smaller in comparison with the
other color modes.
Basic Operation
4-13