Maintenance And Error Messages - Kyocera FS-1118 Operation Manual

Maintenance and Error Messages

Message
Add paper to (paper source).
Close Document Processor.
Close Document Processor
Cover.
Close Top Cover.
Enter address.
Enter destination.
Enter file name.
Enter host name.
Enter path.
Entry error.
Enter correctly.
Error occurred.
Call service person.
C####
Error occurred.
Power switch turn off and on
again.
C####
Exceeded max count. Job is
canceled.
Illegal account. Job is
canceled.
Illegal user ID. Job is
canceled.
OPERATION GUIDE
When any of the following messages appears on the message display, perform the
procedure provided below.
The paper has run out. Add paper to the paper source;
Casset. 1, Casset. 2 (with option paper feeder) or MP
Tray.
The cassette is not properly closed. Be sure the cassette
is closed securely.
The document processor is still open even though an
original has been inserted.
Close the document processor.
The left cover to the document processor is open.
Close the cover securely.
The top cover or the front cover is open.
Close the covers securely.
Enter was pressed without entering a recipient. Enter the
address.
Start was pressed without entering a recipient. Enter the
recipient.
Enter was pressed without entering a file name. Enter
the file name.
Enter was pressed without entering a host name. Enter
the host name.
Enter was pressed without entering a PC folder path or
an FTP network path. Enter the PC folder path or FTP
network path.
An invalid character was entered.
Turn the power switch off and then back on again. If this
message still remains, make a note of the number that is
displayed together with the letter C. Then, turn the power
switch off, and contact your service representative or
authorized service center.
When job accounting is enabled and the current job will
exceed the account limit, press right Select to cancel the
print job.
When job accounting is enabled and the selected
account is invalid, press right Select to cancel the job.
When user login is enabled and the wrong user ID or
password is entered, press right Select to cancel the job.
Procedure
Troubleshooting
Reference
page 2-1
—
—
—
—
—
—
—
—
—
—
—
—
—
6-3