Agilent Technologies Switch/Measure User Manual page 95

Domain Name
A domain name is a registered name on the Internet, which is translated
into an IP address. This feature is available from the remote interface only.
If you change the Domain Name, you must cycle power on the 34980A to
activate the new setting.
• If Dynamic Domain Name System (DNS) is available on your network
• If DHCP is enabled, the DHCP server can change the specified
• The Domain Name is stored in non- volatile memory, and does not
Remote Interface Operation:
SYSTem:COMMunicate:LAN:DOMain "<name>"
34980A User's Guide
and your instrument uses DHCP, the Domain Name is registered with
the Dynamic DNS service at power- on.
Domain Name.
change when power has been off, after a Factory Reset (
command), or after an Instrument Preset (
Features and Functions
*RST
command).
SYSTem:PRESet
2
83