Subaru STARLINK Manual page 62

Bluetooth® SETTINGS
CONNECTING MANUALLY
When the auto connection has failed, it is necessary to connect
Bluetooth phones/devices manually.
Follow the "CONNECTING OR DISCONNECTING Bluetooth
PHONE/DEVICE". (→P.60)
RECONNECTING THE Bluetooth PHONE/DEVICE
If a Bluetooth phone/device is disconnected due to poor
reception from the Bluetooth network when the ignition switch
is turned to the "ACC" or "ON" position, the system automatically
reconnects the Bluetooth phone/device.
● If a Bluetooth phone/device is disconnected on purpose,
such as turning it off, this does not happen. Reconnect
the Bluetooth phone/device manually.
62
DELETING Bluetooth PHONES/DEVICES
1.
Select .
2.
Select Delete (Delete).
3.
Select for the Bluetooth phone/device you wish to
delete.
4.
OK
Select (OK) when the confirmation message appears.
NOTE
The Bluetooth phone/device will still contain information from
l
this system even after the Bluetooth phone/device has been
deleted. Operate the Bluetooth phone/device to delete the system
information saved inside the Bluetooth phone/device.