Subaru STARLINK Manual page 59

4.
Register using your Bluetooth phone/device.
● A PIN-code is not required for SSP (Secure Simple Pairing)
compatible Bluetooth phones/devices. Depending on
the type of Bluetooth phone/device being connected,
a message confirming registration may be displayed
on the Bluetooth phone's/device's screen. Respond and
operate the Bluetooth phone/device according to the
confirmation message.
NOTE
To re-register your Bluetooth phone/device after having deleted it
l
from the system, operate the Bluetooth phone/device and register it
after deleting the previously registered system information from the
Bluetooth phone/device.
5.
Check that the following pop-up screen may be displayed.
●
Cancel (Cancel): Select to cancel the registration.
● If a confirmation message appears asking whether to
transfer the phone's contact data to the system, select the
appropriate button.
6.
When the connection is completed, confirm that a
connected device name is displayed.
● If an error message appears, follow the guidance on the
screen to try again.
NOTE
When registering an NFC compatible device, registration is
l
performed when the Bluetooth phone/device is held against the NFC
logo of the audio system until a connection is established.
Bluetooth® SETTINGS
3
3
59