Subaru STARLINK Manual page 157

Select to change the map display mode between 2D
north-up, 2D heading-up, or 3D heading-up. (→P.159)
*: This item can only be displayed when a route is set.
MAP SCREEN BUTTONS OVERVIEW
The map screen buttons can be accessed by selecting any point
on the map.
Select to change the scale of the map screen. (→P.158)
MAP SCREEN OPERATION
CURRENT POSITION DISPLAY
Re-center
After moving the map,
Re-center
displayed. Select (Re-center) to return the map to
the current position.
NOTE
While driving, the current position mark is fixed on the screen and
l
the map moves.
The current position is automatically set as the vehicle receives
l
signals from the GPS (Global Positioning System). If the current
position is not correct, it is automatically corrected after the vehicle
receives signals from the GPS.
If the battery has been disconnected or when the vehicle is new, the
l
current position may not be correct. As soon as the system receives
signals from the GPS, the correct current position will be displayed.
After moving the map, if it is not moved for a certain amount of time,
l
it will automatically return to the current position.
BASIC OPERATION
(Re-center) may be
7
157