About the Cancel Key
The Cancel key allows you to:
Continue a print job after addressing an error message
Cancel a print job
Begin printing the back of the page during manual duplex printing
For details on manual duplex printing, refer to "How do I manually
duplex?" on page 33.
Continuing a Print Job after an Error Message
You can continue a print job after correcting the following types of errors:
No more media in the tray
Media of a different format than that set in the printer driver was fed into
the printer
For details on the error messages, refer to "Indicator Messages" on
page 60.
1
Check that one of the above errors has occurred.
2
Perform the corrective action.
3
Press the Cancel key (less than 5 seconds).
The print job continues.
Cancelling a Print Job
You can cancel a print job that is currently being processed.
1
While data is being processed or printed (the green "Ready" indicator is
blinking), hold down the Cancel key for more than 5 seconds.
2
Release the Cancel key after both indicators light up.
The current print job has now been cancelled.
6
About the Control Panel