Mechanical Problems; Control Panel Selections Don't Take Effect - QMS Magicolor Magicolor User Manual

Is the printer properly connected via LocalTalk-type cable
and transformer boxes? (See chapter 3, "Connecting the
Printer," for information.)
Is LaserWriter (and Laser Prep, if you are using
LaserWriter 6.0.x or later) installed in your System Folder?
In the Chooser, have you selected the LaserWriter icon and
highlighted the QMS magicolor or magicolor Plus printer?
Is AppleTalk active in the Chooser dialog box?
Are the screen fonts installed?
Is your application compatible with color PostScript Level
2? (Check the application manual. If your application
supports color PostScript Level 1 but not Level 2, try
setting the printer to Level 1 in the Administration/
Emulations/PostScript/Emulation Level menu.)

Mechanical Problems

Control Panel Selections Don't Take Effect

Make sure you're saving menu selections before exiting
the menu. (See "Saving Configuration Selections" in
chapter 4, "Printer Configuration.")
Some configuration selections do not take effect until the
printer has been rebooted. Look in chapter 4, "Printer
Configuration," to see if the selection you are making
requires a reboot.
T r o u b l e s h o o t i n g
Chapter 9
9 - 2 3