Table of Contents
Advertisement
Chapter 8
ACHTUNG!
brauchsmaterial ca. 48 kg. Bitte versuchen Sie niemals, den
Drucker alleine anzuheben oder zu transportieren. Achten Sie
bitte darauf, daß der Drucker mit eingebauten Tonerkar-
tuschen nur waagerecht transportiert wird.
1.
Turn the printer off, remove the power cord, and disconnect
all interface cables from the printer.
2.
With the help of another person, pick up the printer by the four
corners and align it above the sheet feeder (fig. 8.1).
3.
Keeping the printer level, lower it onto the sheet feeder (fig.
8.1). The bottom side edges of the printer rest inside the sides
of the sheet feeder.
Fig. 8.1 Lower Printer onto the Sheet Feeder
4.
Install the two small metal brackets using the following
procedure:
a. Align one of the metal brackets with the outside of the metal post
on the front right side of the sheet feeder (fig. 8.2). Make sure
8 - 2
Das Gewicht dieses Druckers beträgt ohne Ver-
P r i n t e r O p t i o n s
Advertisement
Table of Contents
