QMS Magicolor Magicolor User Manual page 319

Konica minolta magicolor magicolor: users guide
Table of Contents

Advertisement

19. Repeat steps 11 through 18 to install the rest of the printer
fonts on the disk labeled System Fonts 2/Macintosh.
20. When the system software and fonts are loaded use the
following procedure to restart the printer:
a. At the printer control panel, press the Menu key. The following
appears in the printer message window:
b. Press the Next key until the message window displays the
following message:
c. Press the Select key to enter the Boot System submenu. The
following message appears in the message window:
d. Press the Select key and the following message appears:
e. Press the Select key. The system begins loading, and the
following message displays:
At this point, DO NOT TOUCH ANY KEYS until the following
message appears in the printer message window:
P r i n t e r O p t i o n s
INSTALL TO DISK
COMPLETE
QMS SOFTLOAD x.x
INSTALL TO DISK
QMS SOFTLOAD x.x
BOOT SYSTEM
BOOT SYSTEM
HARD DISK
BOOT SYSTEM
HARD DISK 6
BOOT SYSTEM
LOADING
IDLE
Chapter 8
8 - 6 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

MagicolorMagicolor plus

Table of Contents