Offset Printing; Staple Printing - Konica Minolta Magicolor 5550 User Manual

Offset Printing

If offset printing is selected, the paper is fed out shifted as shown below.
When
in sets as shown below.
- When
COLLATE

Staple printing

Pages are stapled and fed out by job or by copy set as shown below.
Page in the portrait orientation are stapled in the upper-left corner.
The copies can be stapled when they contain 2 to 30 pages (3 to 60
pages when double-sided).
If staple printing is selected when
are stapled before being fed out. If staple printing is selected when
COLLATE
out (except when only one copy is being printed).
When copies are stapled, they are not fed out shifted as with offset
printing or job separation printing. Instead, they are fed out at the
same position.
Finishing
PAPER MENU/COLLATE
is set to
ON
is set to , the pages are not stapled before being fed
OFF
is set to , the pages are fed out
ON
- When
COLLATE
is set to
COLLATE
is set to
OFF
, the pages
ON
131