Printing A Vcare Communication Log - Konica Minolta bizhub C220 Setup Instructions

5. Select ID Code, enter your 7 Digit ID Code and then select ID Code again.
6. Press the Maintenance Completion button.
Note: For KM Branches verify that your unit is communicating with the vCare system via
the Hotline at 800-825-5664 or through your BSM.
J. Printing a vCare Communication Log
1. Load Tray 1 or the By-Pass tray with 81/2 X 11 inch paper.
2. Enter Tech Rep mode.
3. Touch [CS-Remote Care].
4. Select ID code and enter the 7 digit code.
5. Touch ID code a second time.
6. Touch Detail Settings to then press [Communication Log Print]
7. Press the Start Key to print the communication Log.
Konica Minolta bizhub C220/C280/C360
bizhub vCare HTTP Setup Guide
Page 13 of 14