Media Types; Plain Paper (Recycled Paper) - Konica Minolta Magicolor 5550 User Manual

For custom sizes, use the printer driver to specify the settings within
the ranges shown in the above table.

Media Types

Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.

Plain Paper (Recycled Paper)

Capacity
Orientation Tray 1
Driver
Media Type
Weight
Duplexing
Glossy
Mode
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
Coated with a processed surface (such as carbon paper, and colored
paper that has been treated)
Media Types
Tray 1 Up to 100 sheets, depending on the paper
(Manual Feed weight.
Tray)
Tray 2/3/4 Up to 500 sheets, depending on the paper
weight.
Face down
(Manual Feed
Tray)
Tray 2/3/4 Face up
Plain Paper (Recycled)
60–90 g/m² (16–24 lb bond)
See page 100 for supported sizes.
Supported
ON/OFF
Glossy mode is Disabled at Grayscale(Color Mode), or
Duplex Print.
101