Staple Finisher (Case 3) - Konica Minolta Magicolor 5550 User Manual

Staple Finisher (Case 3)

If the media misfeed occurred in the center section of the staple finisher, fol-
low the procedure described below to remove the misfed media.
1
Open the finisher cover.
2
Clockwise turn the knob on the
inside until the media is fed into
the main output tray.
3
When the media is fed into the
main output tray, lift up the sub
output tray, and then slowly pull
out the media.
198 Clearing Media Misfeeds